TPT-8000EQ 1 Ohm

5.00 out of 5
(1 customer review)


Number of Channels: 1
RMS Power at 1 Ohm 14.4V: 8900W RMS
RMS Power at 2 Ohm 14.4V: 6000W RMS
RMS Power at 4 Ohm 14.4V: 4000W RMS
Frequency Response: 10Hz ~ 15KHz
Dimensions (L x W x H): 11.57” x 17.51” x 3”
Weight: 13.9 Lbs

Out of Stock

Join the waitlist to be emailed when this product becomes available

SKU: TPT8000EQ - 1 Ohm Categories: ,


Small Footprint Technology!
Timpano amplifiers raises power amplification to a new standard of quality and usability. The new line delivers the most innovative and powerful Brazilian technology in compact full range amplifiers on the market. Loaded with features, it provides an unsurpassed efficiency rate of 85-95% in a compact Class D full range amplifier.

Number of Channels: 1
RMS Power at 1 Ohm 12.6V: 8000W RMS
RMS Power at 2 Ohm 12.6V: 5100W RMS
RMS Power at 4 Ohm 12.6V: 3030W RMS
RMS Power at 1 Ohm 14.4V: 8900W RMS
RMS Power at 2 Ohm 14.4V: 6000W RMS
RMS Power at 4 Ohm 14.4V: 4000W RMS
Supply Voltage: 9.5 ~ 15V
Frequency Response: 10Hz ~ 15KHz
Crossover Low Pass: 50Hz ~ 15KHz
Crossover High Pass: 10Hz ~ 700Hz
Signal to Noise: > 90 dB
Harmonic Distortion: < 0.9 % THD
Input Sensitivity: 0.2V
Input Impedance: 25K OHMS
Impedance Output: 1 OHM
Consumption with Signal Musical: 5.2A ~ 396A
Consumption with Signal Bass: 5.2A ~ 790A
Dimensions (L x W x H): 11.57” x 17.51” x 3”
Weight: 13.9 Lbs


The TPT-8000EQ offer 1 channel with advanced individual equalization features for Bass, Mid Bass and Mid High, plus the traditional Level, High Pass and Low Pass features. Its Full Range frequency response from 10Hz to 15KHz allows the installation of Subwoofers, Woofers, Drivers and Tweeters.

Use the guide Below for recommended applications, where you can get the full potential of your amplifier.

Before Installing:

You must follow the instructions for the product’s installation and connections to guarantee optimal performance. If you have any questions, get in touch with us. Before using the amplifier, always follow these guidelines:

• Make sure the amplifier is switched off before adding or removing any connections. This prevents possible damage to the equipment connected to the amplifier;

• Keep all cables as far away as possible from the ignition cables, electronic injection modules and starter switch since they may cause noise interference;

• Always use 100% Cooper cables and good quality connectors. This guarantees the sound’s quality and fidelity;

• To avoid damaging the cables, make sure that they do not touch sharp metal edges.Important: Use a 350A fuse 12 inches away from the battery as a safety precaution

The power rated data are based on equipment from the STETSOM laboratory. Frequency reference of 1Khz with THD+N to ≤10% in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can present manufacturing variations, thus leading to a variation in the measurements made. This amplifier is designed to perform on music applications ( with speakers ), any load test ( resistant  load ) is not recommended.

Timpano Audio products are guaranteed for a period of ONE (1) YEAR from the date of original purchase against any manufacturer’s defects in material and workmanship under normal use. Read More>>

WARNING: Cancer and Reproductive Harm –

Additional information

Weight 13.9 lbs
Dimensions 11.57 × 17.51 × 3 in
Transit Time

1-2 Business days


NOTE: In the event that the amplifier stops working, unplug the speakers and turn the equipment back on.
Amplifier must NEVER operate with the clipping LED ON !!  Abuse may cause damage to amplifier or speakers. If the problem persists, contact Timpano technical support through the online contact form at

1 review for TPT-8000EQ 1 Ohm

  1. 5 out of 5

    Kevin Williams

Add a review

Your email address will not be published.

Customer questions & answers

  1. 0 votes
    Q What gauge is the input power and the output speaker? answer now
    Asked by CHAD ALLEN LEONARD on February 16, 2020 2:27 am

    Power wire is 1/0 gauge, speaker output is 8 gauge. 

  2. 0 votes
    Q This amp is good for subwoofer or only for mid bass? answer now
    Asked by OMR on March 6, 2019 9:28 pm

    Hello OMR,
    This is a full range amplifier that can be used with subwoofers, mid range, and midbass speakers.

Send me a notification for each new answer.